In fact, can filling machines are usually used, and some problems have occurred. These are not product quality problems, but caused by wrong operation methods. For example, the filling amount of a can filling machine often occurs when the filling amount is uneven, which is caused by incorrect operation.
At present, there are many products with different filling capabilities, production methods, packaging methods, etc., and the quality of the products is different. If the quality of the can filling machine is not good, it will have a great impact on the filling effect. For example, uneven filling levels are a common problem.
During the use of can filling machines, if similar phenomena occur, the equipment must be thoroughly inspected. First check whether there is a side leakage problem at the seal of the filling machine. If a side leakage is found, relock the seal. Then observe whether the piston cylinder leaks. If you encounter this problem, replace the seal ring.
However, if it is not a leak problem, you must consider whether the material is underfilled and then add the material. This may also be caused by the speed of suction and thrust, so the solution is to readjust the front and rear valves of the cylinder to reach a steady state. In addition, the consistency of the material is also a very important factor, and the filling amount will not be uniform, so it must be controlled.
Most of the problems that can occur during the continuous operation of can filling machines are caused by irregular operations and methods of use. For various problems encountered during the use of the filling machine, you must find experience and expertise to handle the equipment to reduce equipment failures and ensure long-term reliable and stable operation of the can filling machine.
RISTON beverage machine, from the manufacture of can filling machines, the design of the entire can filling production line, the design of the entire plant, marketing planning; RISTON beverage machine for you throughout the process.
